Freewing F-16 V2 90mm Unboxing & Assembly + Afterburner LED Install! KarambitKnives,com
Today we’re unboxing the BRAND NEW F-16 V2 High Performance 90mm EDF Jet from Freewing & – PNP at MotionRC. We’re also spicing it up by installing one of my favorite KM RC Afterburners to really complete the looks of this beautiful RC Jet. Please use the timestamps to hop to the parts of the video you need or just enjoy all the way through! #rcplane #rcjet #f16
The KM RC Afterburner light I used
Check out the F-16 V2 High Performance 90mm EDF Jet from Freewing – PNP
Timestamps
00:00 Thank you so much for 100k Subscribers
00:17 What we’re Unboxing & Assembling today
00:57 Unboxing the F-16 V2 High Performance 90mm EDF Jet from Freewing
02:28 First impressions of the V2 90mm F-16
02:55 KM RC Afterburner kit
03:34 How to install the KM RC Afterburner in an RC Jet
06:13 YOU NEED THIS TO USE THE AFTERBURNER!
07:10 Installing the exhaust tip
08:36 Installing the air brakes
09:02 Installing the full stabs / Horizontal Stabilizers
10:35 Installing the Vertical stabilizer / Rudder
11:27 Installing the Main Wings
13:11 Installing the Wing Pylons
13:54 Installing the Ventral Fins
14:33 What Receiver Im using on the F-16 V2 High Performance 90mm EDF Jet from Freewing
15:34 Plugging in the Afterburner
15:52 How to calibrate the KM RC Afterburner
17:00 Installing the push rods on elevator and air brakes
18:03 Fully Assembled First Impressions
18:20 Slowing the air brakes down to look more scale
18:59 Installing the ordinance (missles)
19:13 Installing detail accessories
19:52 Beauty shots of the F-16 V2 High Performance 90mm EDF Jet from Freewing
20:01 Final thoughts on the 90mm F-16 V2
source
KarambitKnives.com
Please use the timestamps to hop to the part you need! 🙂 Thank yall so much for all the amazing support. Can't say thank you enough. Hope you enjoy this unboxing and stay tuned for the maiden flight!
Be careful on landings and take-offs I've heard they can be a little twitchy get rid of the drop tanks and missiles and it will handle better have fun
I subbed for the beard alone.
Great looking plane. Freewing did an awesome job. Only thing that seems to plague a lot of companies who make F-16s is the canopy mounting.
That's a very expensive R/C scale model aircraft.
This has to be one of the fastest growing YT channel for RC I've ever seen. Awesome work. Your channel brings such amazing relatable content. Kudos.
Freewing!!! please use VGA connector, we don't like wires
i didnt know the pawn stars guy flies rc planes
I wanna see u fly a 700-size heli! Take a look at the new sab goblin IL pro!!
Nice build video!!
Nice Bro. Can't wait to see your maiden flight. I bought the ARF Plus version and going to run it on 8s or 10s with a Schubeler.DS-51-AXI HDS 93mm EDF unit and Castle Creations high voltage OPTO ESC with a CC-BEC to power the servos and retracts. I'm also making some DIY rear brakes using micro FPV quad pancake motors. They require no power to operate. You just make a servo switch that connects all the phase wires together and it will slow the jet down. I find reverse thrust is not enough with the short runways I have in my area. If you ever hold a brushless motor and touch the 3 wires together you will see it gets hard to turn the bell on the motor, but that will be more than enough to slow the jet down fast. That is my idea for the DIY brakes. I have not seen it done before. I have done it on an RC car before just for fun like pulling an e-brake. I should make a video showing how it's done. It's super easy. The hard part is finding the right size motor that fits in the tire as it will replace the rim. Then you use anabolic Loctite to fasten the stator to the axle so it is permanent. Yup, I'll make a video. It's been years, and I'm rusty at it. That's why I watch pros like you.
Do you know how you’d go about putting an LED afterburner on the FMS 64mm f16 you have ?
I have the same one and I’d love an afterburner for it